top of page
1.
Turn off the system by pressing the power button.
2.
Unplug power cord.
3.
Unplug transducer from system and remove any sheathing and place transducer
where it will not cross contaminate clean equipment
4.
Wipe off any blood or bodily fluid that is visible on the system console and
transducer using a fresh wipe for each
5.
Take your time cleaning the system to insure a minimum 4 minute wet time is
met.
6.
Pre‐clean the transducer including the cable using a new SONO Wipe and let air
dry prior to placing into your facilities HLD process (i.e. soaking station,
Trophon, ASTRA, TD100)
7.
Do not soak or wipe any electronic components like the inside of the connector
housing.
bottom of page